 |
RESIDENTIAL/COMMERCIAL
VERSA-LOK offers five attractive segmental retaining wall systems equally suited for residential and commercial applications: Standard, Accent, Cobble, Mosaic and Square Foot.
Since 1987, VERSA-LOK has been creating “Solid Solutions” for architects and engineers with the industry’s original solid, top-pinning segmental retaining wall system. Our low-absorption, high-strength, solid concrete units provide not only the long-lasting durability engineers expect, but also the limitless number of design options architects demand.
Create curves, corners, stairs, columns and freestanding walls using Standard, Cobble or Accent VERSA-LOK units, or combine the three to form the random-pattern Mosaic Retaining Wall System. You can even build walls taller than 40 feet with VERSA-Grid soil reinforcement. VERSA-LOK is available in the classic split-face texture at all locations, and also the vintage Weathered texture at select locations. Whatever your choice, solid VERSA-LOK systems are easy to install and provide a lifetime of virtually maintenance-free performance.
|
|
Square Foot is a premium cored unit that covers a full square foot of wall face economically, making it a low-cost alternative for some commercial applications. Its trapezoidal shape and top-pinning system allow for variable bond construction, accurate alignment, tighter vertical joints and easy installation. Square Foot’s unique design enables a near-vertical setback, and its thick face affords greater durability than other cored systems.
| Square Foot Unit Measurements: |
| Height: |
8" (203.2 mm) |
| Width (face): |
18" (457.2 mm) |
| Width (rear): |
14" (355.6 mm) |
| Depth: |
12" (304.8 mm) |
| Face area: |
1 sq. ft. (0.093 sq. m) |
| Weight (without aggregate fill) |
87 lbs. (39.46 kg) |
| Weight (with aggregate fill) |
130 lbs. (58.965 kg) |
Square Foot 90 Degree Corner
The Square Foot Corner unit allows for seamless installation of 90 Degree Outside
Corners.
Weight -87 lbs., Size – 8” tall, 18” wide, 9” deep, Face Area – 1 s.f.,
|
|
Our original, most popular unit. Contractors, engineers and landscape architects agree its solid construction and unique pinning system provide an endless array of design options, hardcore durability and the fastest, easiest installation available. Also available in an increasingly-popular Weathered option at selected dealers.
| Standard Unit Measurements: |
| Height: |
6" (152.4mm) |
| Width (face): |
16" (406.4mm) |
| Width (rear): |
14" (355.6mm) |
| Depth: |
12" (304.8mm) |
| Face area: |
2/3 sq. ft. (.062 sq m) |
| Weight: |
82 lbs. (37.19kg) |
| Weight/Face Area: |
123 lbs./sq. ft (599.84kg/sq m) |
|
|
 Create eye-catching designs by combining all three VERSA-LOK units to form the random-patterned Mosaic Retaining Wall System. Attractive and durable, the Mosaic system utilizes the same four-unit panel (10" x 24")–consisting of one Standard, one Cobble and two Accent units–giving each wall a vintage look and feel. Although its pattern may seem complex, the simplistic four-unit Mosaic panels are just as easy to install as our Standard, Cobble or Accent Retaining Wall Systems.
|
|
Cap units put the finishing touch on your VERSA-LOK wall. They're available in two styles–A and B–and fit all VERSA-LOK retaining wall systems. Caps can be used with all types of designs and wall systems, including VERSA-LOK Brute and Square Foot. For straight walls, use both caps alternately. Outside curves require A caps only; inside curves use B caps.
| A Cap Unit Measurements: |
| Height: |
3 5/8" |
| Width (face): |
14" (355.6mm) |
| Width (rear): |
12" (304.8mm) |
| Depth: |
12" (304.8mm) |
| Face area: |
1/3 sq. ft. (.031 sq m) |
| Weight: |
40 lbs |
| B Cap Unit Measurements: |
| Height: |
3 5/8" |
| Width (face): |
14" (355.6mm) |
| Width (rear): |
16" (406.4mm) |
| Depth: |
12" (304.8mm) |
| Face area: |
1/3 sq. ft. (.031 sq m) |
| Weight: |
50 lbs |
*Actual size and height of units may vary slightly by region.
|
|
|
 Pins/Snap-off Pins
Versa-Tuff Pins are used to provide assured wall alignment, block-to-block shear protection, proper placement of geogrid between block units, and allows for pretensioning geogrid. Pins are made of non-corrosive, glass reinforced nylon. Pins are 6.8” in length and .48” in diameter. |
|
 Baskets/Welded Wire Forms
Baskets are used as facing and compaction forms in Geosynthetic Reinforced Slope applications. Baskets are available in Black or Raw steel for vegetated face and Galvanized steel in rock face applications. Struts are used to brace the baskets during compaction. Struts are also available in Black and Galvanized steel. |
|
 Geogrid/High Strength Geotextile Reinforcement
Geogrid and Geotextiles are high-strength polymer products designed for use as soil reinforcement. Horizontal layers of geosynthetics provide tensile strength to hold the reinforced soil together, so it behaves as one coherent mass. The geosynthetic reinforced soil mass becomes the retaining wall.
|
|
 Drainage Pipe and Accessories
4” High Density Polyethylene pipe and fittings are necessary to provide drainage away from reinforced soil mass. Perforated pipe collects the water and outlets it through solid pipe.
|
|
 Versa-Lifter
The Versa-Lifter makes it easy to lift and place Standard units – especially on the base course. Two prongs on the lifter are inserted into pin holes in each Standard unit. Lifting the handle secures the lifter to the unit and makes for easy, balanced lifting and placement.
|
|
 Versa-Lok Concrete Adhesive
The Versa-Lok Concrete Adhesive is used to secure the cap units to the wall units. This adhesive is among the strongest in the industry and assures caps will not move or be able to be lifted from the wall units. |
|
Engineering Services
Versa-Lok offers preliminary engineering and take-offs at no charge as a service to
our clients and customers. Final engineering and stamped plans will be charged at
a cost per facial square foot of wall.
|
| |
Products shown may be covered by one or more of the following:
U.S. Patent D319,885, U.S. Patent D321,060, U.S. Patent D341,215, U.S. Patent D346,667, U.S. Patent D378,702, U.S. Patent D391,376, U.S. Patent D430,680, U.S. Patent D435,302, U.S. Patent D439,678, U.S. Patent D452,332, U.S. Patent D458,387, U.S. Patent 6,488,448, U.S. Patent 6,960,048, U.S. Patent D537,533, U.S. Patent 7,229,235, U.S. Patent 7,244,079, U.S. Patent D552,258, U.S. Patent D555,810 and other U.S. patents pending; Canadian Industrial Design Registration No. 63929, No. 71472, No. 73910, No. 73911, No. 73912, No. 77816, No. 79058, No. 82288, and No. 89084. I.C.B.O. No. 4625 |
|
PRODUCTS | WHAT ARE SRWS? | CONTACT | LINKS
HOME
|
|
